CeraLux - Productive light curing

The new CeraLux volume light unit now makes the hardening of HyCeram®, LuxArt® or Luxon® materials particularly efficient and cost-saving.

The light-curing design composites LuxArt® or Luxon® can be used to create excellent colour elements on jewellery or watch objects. In addition, light-curing bonding materials (Bond II and Bond THX NF) provide a high bond strength of design composites to all metal substrates. These materials are introduced into the respective object in liquid form and then specifically hardened with blue light.

CeraLux can also be retrofitted with an optional nitrogen N2 set. This allows light curing under inert gas atmosphere. This produces high-gloss, hard colour elements completely without grinding and polishing; extremely fast and strikingly beautiful.

Item number: 200023

Item number: 200023-1
N2Kit (Nitrogen)

Item number: 200023-2
CeraLux Set

Item number: 200023-3
CeraLux US

Nitrogen Kit

Advantages

  • Voluminous exposure space of 30x30x30cm
  • 81 powerful blue light LED
  • All-round mirrored interior
  • Nitrogen light curing possible
  • Comfortable one-button operation
  • Completely noiseless operation
  • Careful, robust workmanship
  • Excellent price-performance ratio

 

Benefits

  • Fast light curing
  • Maximum utilisation of the light potential
  • High-gloss surfaces without polishing
  • Practical work
  • Pleasant working environment
  • Safe operation, even in demanding work environments
  • Fast amortisation of the investment

Technical data

Dimensions

300mm/350mm x 377mm x 310mm
(height front/rear x width x depth)

weight

26 kg

Room volume Light curing

300mm x 300mm x 170mm

Electrical power

160 Watt

Number of LEDs

81 pieces

LED Wavelength range

465 – 475nm

Dimming range LED

1 -100% (default setting 74%)

Minimum curing time

1 second

Maximum curing time

99 minutes / 59 seconds

 


Recommended exposure times

Product

Curing time

Bond II

10 minutes

Bond THX NF

30 minutes

LuxArt®

15 minutes

Luxon®

10 minutes

 


Ceralux installation made easy.

A few steps, easy to understand and simple to use.

The following video will show you the step-by-step setup and installation of our Ceralux volume light unit.

 

Preparation

  • Before the first setup, make sure the workspace is clean and check the necessary connections for electricity and optionally for nitrogen.
     
  • You can find more installation videos on our YouTube channel.

Using Ceralux correctly.

The application process explained step by step.

Light curing with the Ceralux volume light unit follows a clearly defined concept and procedure. In this video we explain step by step how to efficiently cure HyCeram®, LuxArt® or Luxon® materials.
 

Possible materials

  • Bond II Dual Adhesion Booster
  • Bond THX NF Adhesive Amplifier
  • LuxArt design composite
  • Luxon design acrylate

optional nitrogen N2 set

  • Light curing under inert gas atmosphere
  • High gloss surfaces without polishing