StoneLux® 2.0 - repair system for natural and cast stone, sintered ceramics and quartz composite

Click on the respective cross to get detailed information.

The next generation is ready to start

The new comprehensive StoneLux 2.0 Professional repair set for natural stone, quartz composite, stoneware, ceramic and tiles with 10 repair colors and the following highlights:

Module case conception
blue:tron Powerlight
Dual Primer System
Detail Optimizations
ConneX click system

before

after

cleaning solution

Preparation

Bottle 150ml

Usage:
The cleaning solution is used to clean the repair area from all kinds of dirt.

Bellows

Preparation

Usage:
Removes contamination in and around the repair area.

primer universal

Bonding agent

Pen, 1ml

Usage:
Primer universal serves as an adhesion promoter between the surface to be repaired and our material. (replaces the pyrosil gas)

retouching black

Surface processing

Pen, black, 1ml

Usage:
Micro porosities can be incorporated and retouched with this pen in addition to the repair material. (Solvent resistant)

Application tool

Supplies

Use:
Auxiliary for mixing or applying the repair material.

Plastic cannulas

Finishing

10 piece

Usage:
The plastic needles are screwed onto the syringes for better, more targeted dosing. For 100% light exclusion, reseal with the original cap after use.

filler

Repair material

2x 30ml cartridges

Usage:
The filler material is used as a filler to reduce the depth of the repair area.

Additions

Finishing

10x ultrabrush
10x microbrush regular
10x jersey
10x transparent film
mixing plate transpa
light protection orange

Usage:
The micro and ultrabrush brushes are great for lint-free cleaning of the repair area.
The jerseys are used for lint-free cleaning of the repair area.
The vision film is used to cure the material in the absence of Co2 to give a pre-polished, smooth surface.
All materials can be mixed on the Plexiglas mixing plate.
In the case of light-curing materials, it is advisable to work under the light protection orange, as otherwise the material could cure.

Crystals X1

Granulate

<0,2mm, 4 gr transpa
<0,2mm, 4 gr white
<0,2mm, 4 gr black

Usage:
Excellent for natural stones with crystal grains such as marble. Is mixed into the repair material or sprinkled on the surface and then further processed.

Crystals X2

Granulate

0,16 - 0,63mm, 4 gr transpa
0,16 - 0,63mm, 4 gr white
0,16 - 0,63mm, 4 gr black

Usage:
Excellent for natural stones with crystal grains such as marble. Is mixed into the repair material or sprinkled on the surface and then further processed.

Crystals X3

Granulate

0,64 - 1,00mm, 4 gr transpa
0,64 - 1,00mm, 4 gr white
0,64 - 1,00mm, 4 gr black

Usage:
Excellent for natural stones with crystal grains such as marble. Is mixed into the repair material or sprinkled on the surface and then further processed.

Sealer

Preparation

5ml

Usage:
Suitable for the microdefect technique for hairline cracks, preparation margins and other small defects.

Fine grinding pads

Finishing

Grain size 400
Grain size 800
Grain size 1500
Grain size 3000

Usage:
Abrasion and regrinding of the repair material.

blue:tron powerlight

Curing

Usage:
Powerful performance power light with a curing time of only 15 seconds.

prep set

Preparation

Slice
Tip
V-Cylinder
Cylinder
Drill holder with clamping screw

Usage:
Diamond attachments for Dremel for repair site preparation.

primer granite

Bonding agent

Pen, 1ml

Usage:
The primer granite pen serves as an adhesion promoter between the surface to be repaired and our material. (especially for granite)

Working cup

Finishing

Usage:
Water is filled in the working cup for wet grinding.

Proxxon Fine Drill Grinder

Preparation

Usage:
Prepare damaged area for repair.

Battery charging station

Preparation

Usage:
Charging station for the Proxxon fine boring grinders.

Cleaning brush

Finishing

Usage:
The cleaning brush can be used multifunctionally. To clean the repair site from dirt or to clean the blade of the plane.

Polishing paste

Finishing

Bottle 75ml

Usage:
The polishing paste is applied to the repaired area, and worked in by means of polishing block in circular movements and pressure.

Grinding and polishing block

Finishing

Usage:
The cork side is used for sanding with the abrasive cloths.
The felt side is used for polishing, to work in the polishing paste in circular motions.

Composite planer

Finishing

Usage:
The planer is used to remove the excess repair material. (Blade can be used on both sides - magnetic attachment).

Hand applicator

Supplies

Application:
Hand applicator for the 30ml filler cartridge.

colour

Repair material

8x syringe, 2ml
(white, marblewhite, yellow, red, green, blue, brown, black)

Usage:
colour repair materials in earthy tones, especially for colour characterization for natural and artificial stone.