Pen, 1ml

Usage:
Primer universal serves as an adhesion promoter between the surface to be repaired and our material. (replaces the pyrosil gas)

Usage:
Powerful performance power light with a curing time of only 15 seconds.

1x Syringe, 3ml

Usage:
filler material is used as a filler to reduce the depth of the repair site.

Syringe, 2ml
(white)

Usage:
color repair materials, especially for color characterization for natural and artificial stones.

Usage:
The planer is used to remove the excess repair material. (Blade can be used on both sides - magnetic attachment).

Usage:
The cork side is used for sanding with the abrasive cloths. For this purpose, the repair material is reground after planing and prepared for polishing.
The felt side is used for polishing, to work in the polishing paste in circular movements.

Bottle 75ml

Usage:
The polishing paste is applied to the repaired area and worked in by means of polishing block in circular movements and pressure.

Usage:
The cleaning brush can be used multifunctionally. To clean the repair site from dirt or to clean the blade of the plane.

Grit 400
Grit 800
Grain size 1500
Grain size 3000

Usage:
Abrasion and regrinding of the repair material.

Usage:
Water is filled in the working cup for wet grinding.

Syringe, 3ml

Usage:
transpa repair material is applied for minor corrections or as a top coat on high-gloss stone surfaces.

Pen, 1ml

Usage:
The primer granite pen serves as an adhesion promoter between the surface to be repaired and our material. (especially for granite)

0,16 - 0,63mm, 4 gr transpa
0,16 - 0,63mm, 4 gr white
0,16 - 0,63mm, 4 gr black

Usage:
Excellent for natural stones with crystal grains such as marble. Is mixed into the repair material or sprinkled on the surface and then further processed.

10x ultrabrush
10x microbrush regular
10x jersey
10x transparent film
mixing plate transpa
light protection orange

Usage:
The micro and ultrabrush brushes are excellent for lint-free cleaning of the repair area.
The jerseys are used for lint-free cleaning of the repair area.
The vision film is used to cure the material in the absence of Co2 to give a pre-polished, smooth surface.
All materials can be mixed on the Plexiglas mixing plate.
In the case of light-curing materials, it is advisable to work under the light protection orange, as otherwise the material could cure.

10 piece

Usage:
The plastic needles are screwed onto the syringes for better, more targeted dosing. For 100% light exclusion, close again with the original cap after use.

Use:
Auxiliary for mixing or applying the repair material.

Usage:
color repair materials, especially for color characterization for natural and artificial stones.

Usage:
The purpose of the vision film is to cure the material in the absence of Co2 to obtain a pre-polished, smooth surface.

Bottle 150ml

Usage:
The cleaning solution is used to clean the repair area from all kinds of dirt.