In the following video, you will find a step-by-step description of the setup and installation of our HyCeram® devices.

Preparation:

• Before the first set-up, make sure that the workplace is clean and check the necessary connections for compressed air and electricity.
• You can find more installation videos on our YouTube channel

The processing of HyCeram® follows a clearly defined concept and sequence. In this video we explain step by step how the hybrid ceramic is processed, cured and finished.

Manufacturing process

•     Filling   
•     Milling (milling accuracy: 0.02 mm)
•     Injection molding (molding accuracy 0.05 mm)

Possible second processing steps

•     Engraving      
•     Laser engraving
•     Drilling
•     Milling
•     Electroplating
•     Setting stones

With our ceramic materials, not only special filling techniques can be realized, but also exceptional build-up techniques.

The metal ingot retention, which serves as an anchoring element, is particularly important. This allows HyCeram materials to anchor firmly to the surface.

In this video we explain step by step how the build-up technique with HyCeram - our hybrid ceramic material - is correctly applied, cured and finished.

In the following video, the care and maintenance of our CeraPower pressure pot is explained step by step.

Preparation:

• Attention: Replace the Thermo Liquid only after it has cooled down to room temperature!
• You can find more installation videos on our YouTube channel.