StoneLux® Profi with TwinLux

1x ethanol solution, 150ml

Use:
The cleaning solution is used to clean the repair area from all possible dirt.

1x pen, 1ml

Use:
The primer pen is used as an bonding agent between the surface to be repaired and our material.

2x syringe, 3ml

Use:
Transpa Flow repair material is used for small corrective repairs or as top layer on high-gloss stone surfaces.

1x syringe, 3ml

Use:
Base material is used as filler to reduce the depth of the repair area.

8x syringe, 2ml
(white, marble white, yellow, red, green, blue, brown, black)

Use:
Repair materials in earthy tones, especially for color characterization of natural stones.

1x black, 1ml

Use:
Micro porosities can be incorporated and retouched with this pen in addition to the repair material. (Solvent-unresistant)

4 pieces, plastic

application:
Tool for mixing or applying the repair material.

3 x X3, crystal size 0.64 - 1.00mm, jar 4 g
(white, transparent, black)
3 x X2, crystal size 0.16 - 0.63mm, jar 4 g
(white, transparent, black)

Use:
Excellent for natural stones with crystal grains such as marble. Is mixed into the repair material or sprinkled over the surface and then processed further.

Content:
1x working beaker
6x silicone abrasive cloth (2 each with grain size 2400/3200/4000)
5x transparent films
5x cotton jersey cloths
15x plastic cannulas
1x mixing pad plexiglass

Use:
The working cup is filled with water for wet grinding.
The fine micro cracks and slight surpluses of the repair material are regrinded with the silicone abrasive cloth.
The transparent foil is used to harden the material under exclusion of Co2 to obtain a pre-polished, smooth surface.
The cotton jersey clothes are ideal for lint-free cleaning of the repair area.
The plastic cannulas are screwed onto the syringes for better, more targeted dosing. For 100% light exclusion after use, close again with the original cap.
All materials can be mixed on the Plexiglas mixing plate. (Cover with UV protection glass - light-curing material)

50ml

Use:
The Pyrosil gas is a butane-propane mixture with added chemicals and used for e.g. soft stones, because an artificial SiOx layer has to be created.

Torch

Use:
The Pyrosil gas is a butane-propane mixture with added chemicals and used for e.g. soft stones, because an artificial SiOx layer has to be created.

Powerful light unit, 2 LEDs with a wavelength of 440nm - 480nm, for a polymerization of light-curing materials within minutes

Planer

Use:
The planer is used to remove the excess repair material. (Blade can be used on both sides - magnetic attachment)

Block

Use:
The cork side is used for sanding with the abrasive cloth. For this purpose the repair material is reground after planing and prepared for polishing.
Filz side is used for polishing, to work in the polishing paste in circular movements.

1x bottle, 150ml

Use:
The polishing paste is applied to the repaired area and worked in with circular movements and pressure using a polishing block.

Use:
The cleaning brush can be used multifunctional. To clean the repair area from dirt or to clean the blade of the planer.