StoneLux® Compacc MultiLux

Natural and engineered stone repair instead of replacement.
See a more detailed view and information of our products on mouserover.

In-situ repair is often the only option especially for surface damage to firmly installed natural or engineered stone. Scratches, cracks or holes can be repaired quickly and almost invisibly with StoneLux®. The repair system from invicon is ideal for professional application.

  • Colour-stable over many years
  • Repair area up to 3.7 t/cm2 can be loaded immediately after curing
  • 75 kg/cm2 adhesive strength
  • Powerful lighting devices for instant curing
  • Temperature resistant (-20°C to 120°C)
  • Abrasion Resistant
  • Suitable for indoor and outdoor use
StoneLux® repair marble
before
before
after
after

A Complete Repair System

The StoneLux® repair system consists of combinable component products. invicon already offers "pre-configured" complete systems, tailored for professional application on site. We have included everything necessary for a professional surface repair application in a robust case. If required, the basic case contents can always be customised, supplemented, extended and replaced as needed.

Grinding and polishing block

Finishing

Block

Use:
The cork side is used for sanding with the abrasive cloth. For this purpose the repair material is reground after planing and prepared for polishing.
Filz side is used for polishing, to work in the polishing paste in circular movements.

Composite planer

Finishing

Planer

Use:
The planer is used to remove the excess repair material. (Blade can be used on both sides - magnetic attachment)

Cleaning Brush

Finishing

Brush

Use:
The cleaning brush can be used multifunctional. To clean the repair area from dirt or to clean the blade of the planer.

Application instruments

Supplies

4 pieces, plastic

application:
Tool for mixing or applying the repair material.

Mixing plate plexiglass

Finishing

1x plexiglass plate

Use:
All materials can be mixed on the Plexiglas mixing plate. (Cover with UV protection glass - light-curing material)

Plastic cannulas

Finishing

15x plastic cannulas

Use:
The plastic needles are screwed onto the syringes for better, more targeted dosing. For 100% light exclusion after use, close again with the original cap.

transparent film

Finishing

5x viewing foils

Use:
The transparent film is used to harden the material under exclusion of Co2 to obtain a pre-polished, smooth surface.

Silicone abrasive cloth

Finishing

6x silicone abrasive cloth (2 each with grain size 2400/3200/4000)

Use:
The fine micro cracks and slight excesses of the repair material are regrinded with the silicone abrasive cloth.

MultiLux LED 60 - Light curing unit

Curing

Powerful light unit with 60 LEDs with a wavelength of 465nm - 485nm, for a polymerization of light-curing materials within minutes

Primer

Bonding agent

1x pen, 1ml

Use:
The primer pen is used as an bonding agent between the surface to be repaired and our material.

Transpa flow

Repair material

1x syringe, 3ml

Use:
Transpa Flow repair material is used for small corrections or as top layer on high gloss stone surfaces.

Color white

Repair material

1x syringe, 2ml

Use:
Repair materials in earthy tones, especially for color characterization of natural stones.

Color black

Repair material

1x syringe, 2ml

Use:
Repair materials in earthy tones, especially for color characterization of natural stones.

Structural crystals X3 transpa

Granulate

1 x X3 transpa, crystal size 0.64 - 1.00mm, jar 4 g

application:
Excellent for natural stones with crystal grains such as marble. Is mixed into the repair material or sprinkled over the surface and then processed further.

Structural crystals X3 white

Granulate

1 x X3 white, crystal size 0,64 - 1,00mm, jar 4 g

application:
Excellent for natural stones with crystal grains such as marble. Is mixed into the repair material or sprinkled over the surface and then processed further.

Structural crystals X3 black

Granulate

1 x X3 black, crystal size 0,64 - 1,00mm, jar 4 g

application:
Excellent for natural stones with crystal grains such as marble. Is mixed into the repair material or sprinkled over the surface and then processed further.

Cleaning solution

Preperation

1x ethanol solution, 150ml

Use:
The cleaning solution is used to clean the repair area from all possible dirt.

Polishing paste

Finishing

1x bottle, 150ml

Use:
The polishing paste is applied to the repaired area and worked in with circular movements and pressure using a polishing block.

Our system variants for you.

Further additional possibilities for the system variants.

StoneLux® Supplementary Kit

Supplementary kit tile
The ideal additional equipment
For
Tiles, ceramic tiles and stoneware
With
7 light-curing repair pastes