StoneLux Tile® Profi Multilux | invicon chemical solutions gmbh

Schweizer Strasse 96 | 6830 Rankweil | Austria

+43 (0)5522 45 301

See a more detailed view and information of our products on mouserover.

Tiles and slabs - whether on the wall or on the floor, indoors or outdoors - quickly become scratched, cracked or drilled. Instead of replacing the tile or slab at great expense, surface repair with StoneLux® Tile saves both time and money. This repair system was specially developed for use on tiles and slabs: its consistency and thixotropic* properties allow drip-free application even on vertical surfaces.

*thixotropic = more liquid during processing, viscous before and after.

Color stable, no yellowing
Repair area loadable up to 4.1t/cm2 immediately after curing
85 kg/cm2 adhesive force to the tile
Suitable for both smooth and textured surfaces
Abrasion resistant
Temperature resistant (-25 °C - 120 °C)
Thixotropic: can also be used in vertical surfaces

before

before

after

after

Tile repair with system

The components of the StoneLux® Tile repair system interlock perfectly. To ensure that everything is always clearly arranged and ready to hand in its place for the surface repair of tiles and slabs, invicon already offers tried-and-tested modules. Of course, these can also be used to put together individual complete systems to meet your own requirements. These materials and the accessories for the repair are grouped together in a craftsman's case. Everything is ready to hand in its place and can be reordered and individually supplemented as required.

Transpa Gel

Repair material

2x syringe, 3ml

Usage:
Transpa Gel repair material is used for minor corrections or as a top layer on high-gloss tile surfaces.

Opaquer

Covering material

1x Syringe, 3ml

Usage:
Opaquer material is used to cover the shard with color.

Color white

Repair material

1x Syringe, 3ml

Usage:
Repair materials in strong shades, especially for color characterization for tiles, slabs and sanitary ceramics.

Color yellow

Repair material

1x Syringe, 3ml

Usage:
Repair materials in strong shades, especially for color characterization for tiles, slabs and sanitary ceramics.

Color red

Repair material

1x Syringe, 3ml

Usage:
Repair materials in strong shades, especially for color characterization for tiles, slabs and sanitary ceramics.

Color orange

Repair material

1x Syringe, 3ml

Usage:
Repair materials in strong shades, especially for color characterization for tiles, slabs and sanitary ceramics.

Color blue

Repair material

1x Syringe, 3ml

Usage:
Repair materials in strong shades, especially for color characterization for tiles, slabs and sanitary ceramics.

Color green

Repair material

1x Syringe, 3ml

Usage:
Repair materials in strong shades, especially for color characterization for tiles, slabs and sanitary ceramics.

Color brown

Repair material

1x Syringe, 3ml

Usage:
Repair materials in strong shades, especially for color characterization for tiles, slabs and sanitary ceramics.

Color black

Repair material

1x Syringe, 3ml

Usage:
Repair materials in strong shades, especially for color characterization for tiles, slabs and sanitary ceramics.

Application instruments

Supplies

1x spatula, metal
1x probe, metal
1x application brush

Application:
Auxiliary for mixing or applying the repair material.
The brush is ideal for creating various surface effects with the brush technique.

Diamond cone

Preparation

5x diamonds for Dremel "cone with shoulder

Diamond cylinder

Preparation

5x Diamonds for Dremel "Cylinder"

Mixing plate plexiglass

Finishing

1x plexiglass plate

Usage:
All materials can be mixed on the Plexiglas mixing plate. (Cover with UV protection glass - light-curing material).

Light protection

Supplies

1x UV light protection cap

Usage:
For light-curing materials, it is recommended to work under the light protection cap, as otherwise the material could cure faster.

Cannulas

Finishing

15x plastic cannulas
15x 0,4mm cannulas

Usage:
The cannulas are screwed onto the syringes for better, more targeted dosing. For 100% light exclusion, close again with the original cap after use.

Grinding cloth

Finishing

6x silicone abrasive cloth (2 each with grit size 2400/3200/4000).

Usage:
The silicone abrasive cloths are used to regrind the fine microcracks and slight excess of the repair material.

Visual film small

Finishing

5x visual film

Usage:
The purpose of the visual film is to cure the material under the exclusion of Co2 to obtain a pre-polished, smooth surface.

Visual film large

Finishing

5x visual film

Usage:
The purpose of the visual film is to cure the material under the exclusion of Co2 to obtain a pre-polished, smooth surface.

Bellows

Preparation

1x bellows

Usage:
Removal of dirt with hand blower bellows.

Proxxon

Preparation

Proxxon Dremel

Usage:
Prepare damaged area for repair.
(Use cone diamond for an undercut).

Polirapid cotton

Finishing

6 pieces

Usage:
Clamp cotton brush on Proxxon and work in polishing paste with low rotation.

Polirapid goat hair

Finishing

6 pieces

Usage:
Clamp goat hair brush on Proxxon and work in polishing paste with high rotation.

Primer

Bonding agent

1x pen, 1ml

Usage:
The primer pen serves as an adhesion promoter between the surface to be repaired and our material.

Pyrosil gas refill bottle

Bonding agent

50ml

Usage:
The pyrosil gas is a butane-propane mixture with added chemicals and is used for soft stones, for example, as an artificial SiOx layer must be created.

Pyrosil torch

Bonding agent

Torch

Usage:
The pyrosil gas is a butane-propane mixture with added chemicals and is used for soft rocks, for example, as an artificial SiOx layer must be created.

Grinding and polishing block

Finishing

Block

Usage:
The cork side is used for sanding with the abrasive cloths. For this purpose, the repair material is resanded after planing and prepared for polishing.
Felt side is used for polishing, to work in the polishing paste in circular motions.

Dialux blanc polishing rod

Finishing

1x Polishing rod, 100g

Usage:
The pressed polishing paste is applied to the repaired area and worked in using a polishing block or Polirapid cotton or goat hair brush with the Proxxon in circular movements and light pressure.

Composite plane

Finishing

Planer

Usage:
The planer is used to remove the excess repair material. (Blade can be used on both sides - magnetic attachment).

Ultrabrush

Preparation

1x 100 pcs ultrabrush brush

Usage:
The Ultrabrush brushes are ideal for lint-free cleaning of the repair area.

Microbrush

Preparation

1x 100 pcs microbrush brush

Usage:
The microbrush brushes are ideal for lint-free cleaning of the repair area.

MultiLux LED 60 - Light curing unit

Curing

Powerful light unit with 60 LEDs with a wavelength of 465nm - 485nm, for polymerization of light-curing materials within minutes.

Polishing paste

Finishing

1x bottle, 150ml

Usage:
The polishing paste is applied to the repaired area and worked in by means of polishing block in circular motions and pressure.

Air Barrier Gel

Finishing

Usage:
Air Barrier Gel is a liquid protective film; This preserves the surface texture and provides a high gloss finish.

Cleaning solution

Preparation

1x bottle 150ml

Usage:
The cleaning solution is used to clean the repair area from all kinds of dirt.

Tricots

Preparation

10x Tricots

Application:
The tricots are ideal for lint-free cleaning of the repair area.

Store StoneLux® Tile materials and Primer at room temperature 15°C - 28°C.

Protect StoneLux® Tile materials from direct sunlight.

Protect StoneLux® Tile materials from moisture.

StoneLux® Tile gel and StoneLux® Tile colors
StoneLux® Tile Primer

5 years at room temperature
3 years at room temperature

General information

• Do not use products after expiration date.

• Observe storage instructions on labels and packaging.

• Keep out of reach of children.

complete system
with MultiLux LED 60 light curing unit

For
Tiles, ceramic tiles and stoneware

With
11 light-curing repair pastes

Curing time
1 minute per exposure area

complete system
with TwinLux light unit

For
Tiles, ceramic tiles and stoneware

With
11 light-curing repair pastes

Curing time
1 minute per exposure area

Supplementary kit stone
The ideal additional equipment

For
natural stone

With
7 light-curing repair pastes

Austria

to the Homepage

Germany

to the Homepage

Switzerland

to the Homepage